Search results

The Spectrum II is a new case to the lineup, so we don't have much info on how case fans are wired. Normally it's one of two ways: Case fans are connected to an ARGB controller, that is in turn connected to the Reset button on the case. Pressing the Reset button cycles the fans through a number...

To be fair, it's what many of the videos show, people pounding the Bios key

PCS will ensure the PC is well packaged with protective foam etc. And if there is any damage, you can just contact them and they will replace/repair. It's rare we hear of damaged deliveries on here or on the Discord. Delivery times will vary based on location, but you'll get tracking info so...

Turn off the PC (hold down power button on the case). Restart the PC and immediately keep pressing Del key to see if it will enter the BIOS screen

Classic MMTS build....

Never heard of a vertical mounted M.2 until now, interesting. Your wifi card is unplugged btw, but you're probably not using it.

I'd do the re-seat first. Takes all of 1 min to do, and if it's the cause, means the memtest should pass first time. Rather than having to run memtest, have it fail, re-seat ram and then run memtest all over again.

Unless you're planning on buying the upgrade through PCS, there are some better AIOs out there than Corsair's offering. Arctic Liquid Freezer, Deepcool LT720 or EK Nucleus CR360 all offer better performance and sometimes price too.

Run a speed test on the Deco app itself, as that tests the connection on the main hub direct to the internet connection, which will give you as true a measure of your broadband connection speed as possible. Running the speed test on your PC obviously has to take distance from router, wifi...

I use Fan Control for case and gpu fans, and OpenRGB for RGB. Small, efficient applications.

So 99 would indicate some device is not interfacing with the motherboard properly. Could be USB (aio connects via usb header), could be RAM, could be CPU, etc. Either way, I think given it's a brand new PC, I'd contact PCS support for assistance. Can I ask what you intend to use the PC for? Is...

Side thought: you definitely had the monitor connected to the GPU and not the onboard graphics? Could possible account for the low fps if you had

“Optimising” windows based on a YouTube video wasn’t a good move, would have been better to have used Pc for a bit out of the box to confirm it was working correctly and if changes needed be certain of what they were. But what is done is done When you say it won’t boot, do you see the POST...

13900K, on 120 aio????..... That's a no no in my book

If you're looking at a mesh wifi, this is what I'd have my eye on: https://www.amazon.co.uk/TP-Link-Deco-X60-3-pack-Extenders/dp/B08759W2P7 Reduced to £229 right now.

I like the Unifi range, they're well made, great feature set, and not too expensive. Bro in law has a unifi setup including cameras. My only concern with this Dream Router is if it will provide the wifi coverage you need. We all know how theoretical range goes out the window very quickly, so I'd...

Got a 3D printer handy?

Not always, sometimes WU can fail to detect wifi and bt devices, so you need to use drivers from Asus, etc. Sometimes it's as bad as not installing the correct chipset drivers...

Remove dust filters if the fans are set to exhaust, you want the dust to be able to escape from the case if it's blowing air out. But keep any filters that are in front of intake fans

Probably one or more of the LEDs inside has failed, so you can no longer get the full range of colours. Try setting some static colour on the pump in ICUE to see what colour might have failed. E.g. set all red, all blue, all green. I suspect blue is the issue