RichLan564
Bright Spark
Correct.
Because the 4000x comes with a PWM splitter for speed control and lighting node for RGB of the case fans that what gets used
War Machine ?
- Thread starter Warbelian
- Start date
Because the 4000x comes with a PWM splitter for speed control and lighting node for RGB of the case fans that what gets used
B4zookaw
VALUED CONTRIBUTOR
I had this a few times at the start. Try this: Disconnect the ethernet cable, turn off PC, then turn off the Power Supply. Count to 30, then turn everything back on and once booted plug in the cable again.
No idea why it was occuring, that that fixed it for me. And yes, I had all my drivers up to date, etc
No idea why it was occuring, that that fixed it for me. And yes, I had all my drivers up to date, etc
Warbelian
Bronze Level Poster
Thanks for an alternative, PCS was quick to action a solution as well, leaving below for anyone with this issue:
First right click on Intel Ethernet Controler and uninstall it then reboot your system, go to this link https://dlcdnets.asus.com/pub/ASUS/mb/04LAN/DRV_LAN_Intel_I225_SZ-TSD_W10_64_V10214_20211019R.zip and download it, unzip it and install it then reboot your system again.
Warbelian
Bronze Level Poster
Btw mate, since we have a similar build, which software do you use to control your PC ?
I've reset mine to get rid of all the bloatware I first installed for no reason, currently I just have iCue installed and nothing else.
Other than that just the core stuff like chipset drivers.
I've reset mine to get rid of all the bloatware I first installed for no reason, currently I just have iCue installed and nothing else.
Other than that just the core stuff like chipset drivers.
B4zookaw
VALUED CONTRIBUTOR
- I use iCUE to control all fans (Corsair ML120s x6) and the bios to control the exhaust fan (which I updated to a Silent Wings 3 120 PWM).
- I use MSI Afterbunner to control GPU fans using a custom curve. I found Firestorm (Zotac's GPU app) on auto would ramp fans to 100% and their custom curve editor didn't have as many points as Afterburners. I do use Firestorm to set the RGB on the GPU, but I don't have it running in background
Warbelian
Bronze Level Poster
Nice one, appreciate that mate.
I've opened my side case to see where the front standalone fans were plugged and they are plugged to this little board, I'm assuming it's the
lighting node,
Now after looking at some topics online, in order to add the 3 front fans to the RGB sync function, I would have to change the commander core to have 6 fans instead of 3, now my issue is that iCue doesn't detect my commander core.
I've opened my side case to see where the front standalone fans were plugged and they are plugged to this little board, I'm assuming it's the
lighting node,
Now after looking at some topics online, in order to add the 3 front fans to the RGB sync function, I would have to change the commander core to have 6 fans instead of 3, now my issue is that iCue doesn't detect my commander core.
RichLan564
Bright Spark
What case is it ?
RichLan564
Bright Spark
RichLan564
Bright Spark
Looks like they are SP Elites
Corsair iCUE 4000X RGB Case Review - Legit Reviews
The iCUE 4000X RGB computer case is the new addition to the iCUE Smart Case series from Corsair. It comes with two tempered glass panels and dedicated front ventilation channels, which offer great looks and airflow. Three 120mm SP RGB ELITE fans with AirGuide technology are mounted at the front...
www.legitreviews.com
RichLan564
Bright Spark
You would need to move the front fans speed and RGB over to the Commander CoreThanks for that mate,
I'm a bit confused now,
The iCue when asking me to set up the fans, it asks to do it from the Commander Core but the front fans are connected to the Lighting Node Core, how do I set up the fans that are connected there ?
Not sure why your lighting node isn't showing in iCUE though....
Warbelian
Bronze Level Poster
RichLan564
Bright Spark
My case had a USB hub in the bottom, check if there is one and everything is plugged in securely and the USB header is plugged into the MB properly
Warbelian
Bronze Level Poster
Took a year but ended up doing it myself as the solution was to send it back
Still a bit weird thought, I have no clue what this piece does where I disconnected it from,
While it was in assembly don't they check if it's working in synch ?
Anyways, it's fixed now and iCue was able to detect the extra 3 fans after running the install wizard.
Now I can have my Cyberware build completed without the front panel ruining it for me.
