PC Review (Ordered but processing)

H

Hix

Active member
I also forgot to thank you guys! So, again, many thanks for your advice. It's greatly appreciated. Absolutely superb community on here :)
 
J

JohnT13

Member
Hix said:
Rang them up and asked if it was possible to amend the order to include 1x Corsair ICUE LINK RX120 RGB in place of the PCS one to which they did. Top notch service from them considering they only sell those in packs of three or more.

I did also apologise for my egregious oversight and the fact the technician will need to refit and cable manage again! 🤣
Click to expand...
That is interesting.... when I spoke with the sales team they said I would have to order a minimum of three RX120 fans - I couldn't have just one. That was pre-order mind so I might contact them again given I am no 53 in the 50 series queue (so will probably be getting my PC circa 2029) so plenty of time to make swaps. :cool:
 
  • Sad
Reactions: Hix
H

Hix

Active member
JohnT13 said:
That is interesting.... when I spoke with the sales team they said I would have to order a minimum of three RX120 fans - I couldn't have just one. That was pre-order mind so I might contact them again given I am no 53 in the 50 series queue (so will probably be getting my PC circa 2029) so plenty of time to make swaps. :cool:
Click to expand...
I hope they sort it for you! Maybe they can use the now remaining two fans from the pack of three they used for me :D
 
Nursemorph

Nursemorph

Silver Level Poster
If they don't sort it, as I mentioned, just ask them not to put the rear one in. You can then either leave it out entirely (gaming cases these days don't generally need a rear fan....it's either for aesthetics or it's more for people like me who have an absolute need for one out of habit as a PC without an exhaust fan looks wrong :ROFLMAO: ) or buy it yourself and fit (it's relatively simple to do)
 
H

Hix

Active member
Good morning! I am thinking of getting a GPU bracket to prevent sag. I don't mind the PCS one, but I've seen a nice one from Corsair which gives me the option of adding the LC100 lighting panels and controlling them via iCUE in the future.

I am wondering if any of you guys have used/have experience with the GPU Anti-Sag Bracket - Black from Corsair? Based on my PC picture I think there would be a gap between the PSU 'shelf' and my GPU (see attached). I think it appears you can likely screw it into the PCIe back plates higher up? Though it would seem their intention is to use the shelf as the base.

I quick Google or search on YouTube only showed it being used from the PSU shelf.

Any of you guys got one or seen one used in that way?
 

Attachments

  • PC1.PNG
    PC1.PNG
    708.4 KB · Views: 20
Last edited:
SpyderTracks

SpyderTracks

We love you Ukraine
Hix said:
Good morning! I am thinking of getting a GPU bracket to prevent sag. I don't mind the PCS one, but I've seen a nice one from Corsair which gives me the option of adding the LC100 lighting panels and controlling them via iCUE in the future.

I am wondering if any of you guys have used/have experience with the GPU Anti-Sag Bracket - Black from Corsair? Based on my PC picture I think there would be a gap between the PSU 'shelf' and my GPU (see attached). I think it appears you can likely screw it into the PCIe back plates higher up? Though it would seem their intention is to use the shelf as the base.

I quick Google or search on YouTube only showed it being used from the PSU shelf.

Any of you guys got one or seen one used in that way?
Click to expand...
What GPU are you ordering, as GPU's will normally come with a sag bracket if one is required for that model?
 
H

Hix

Active member
SpyderTracks said:
What GPU are you ordering, as GPU's will normally come with a sag bracket if one is required for that model?
Click to expand...
I didn't order one via PCS as I have a NVIDIA GEFORCE RTX 5080 FE 16GB ready to install once I get my PC. It didn't come with a bracket because NVIDIA 🙃
 
SpyderTracks

SpyderTracks

We love you Ukraine
Hix said:
I didn't order one via PCS as I have a NVIDIA GEFORCE RTX 5080 FE 16GB ready to install once I get my PC. It didn't come with a bracket because NVIDIA 🙃
Click to expand...
Ah, ok, so I think it would take up the 3rd slot on the rear case up from the bottom for that bracket, there's plenty of room.

It doesn't use the shelf, uses the PCIe card mounts on the rear of the case. So you'd mount it as you would any PCIe card
 
  • Like
Reactions: Hix
J

JohnT13

Member
Nursemorph said:
If they don't sort it, as I mentioned, just ask them not to put the rear one in. You can then either leave it out entirely (gaming cases these days don't generally need a rear fan....it's either for aesthetics or it's more for people like me who have an absolute need for one out of habit as a PC without an exhaust fan looks wrong :ROFLMAO: ) or buy it yourself and fit (it's relatively simple to do)
Click to expand...
Good suggestion :) . I did say to PCS that would take a look to see how the aesthetic looked (personally I am not bothered but certain family members are very bling orientated at the moment) and get one myself if needed.
 
H

Hix

Active member
Evening folks! My build arrived yesterday and managed to finish setup of the PC and my desk today. I thought I'd share :) Once again, many thanks for your help and advice, fantastic community here. It was definitely greatly appreciated ❤️

Had a little trouble with my GPU, sadly it turned out the cable they routed ready for it wasn't fully seated in the PSU. Meaning I had to undo some of their lovely cable management to get to it properly. In addition, the BIOS was fairly out of date too (considering the release date of the most recent updates and when it was built). However, both issues didn't take too long to sort. A little disappointing given their customer service generally has been fantastic.
 

Attachments

  • PXL_20250222_003916837.jpg
    PXL_20250222_003916837.jpg
    421.6 KB · Views: 17
  • PXL_20250222_004011219.jpg
    PXL_20250222_004011219.jpg
    382.1 KB · Views: 17
SpyderTracks

SpyderTracks

We love you Ukraine
Hix said:
Evening folks! My build arrived yesterday and managed to finish setup of the PC and my desk today. I thought I'd share :) Once again, many thanks for your help and advice, fantastic community here. It was definitely greatly appreciated ❤️

Had a little trouble with my GPU, sadly it turned out the cable they routed ready for it wasn't fully seated in the PSU. Meaning I had to undo some of their lovely cable management to get to it properly. In addition, the BIOS was fairly out of date too (considering the release date of the most recent updates and when it was built). However, both issues didn't take too long to sort. A little disappointing given their customer service generally has been fantastic.
Click to expand...
Big respect for the Funko Pops! No system is complete without them!

Looking really nice

 
  • Love
Reactions: Hix
SpyderTracks

SpyderTracks

We love you Ukraine
Paul1964 said:
I think this policy is ridiculous. Part of keeping a PC running well and ensuring ongoing compatibility with drivers etc is keeping the BIOS up to data as well as Windows.
Click to expand...
And no one is disputing that. But I think you're misinterpreting what that means, it doesn't mean you can't flash a BIOS update.

The policy is there to safeguard the customer, if anything should go amiss during the flash and it bricks the board or an issue arises related to the BIOS down the line, you're covered by warranty and PCS would swap it out.

If you don't contact them, and you either flash a BETA BIOS without realising, or power off because it's taking too long and it's down to the fault of the customer, then obviously no manufacturer would cover that claim, and PCS would be out of pocket if they were to honour the customer flashing it as they wanted.

Remember, PCS have no idea what technical level you're at, it's down to you to run it past them first.
 
Last edited:
Ekans2011

Ekans2011

VALUED CONTRIBUTOR
Paul1964 said:
I think this policy is ridiculous. Part of keeping a PC running well and ensuring ongoing compatibility with drivers etc is keeping the BIOS up to data as well as Windows.
Click to expand...
Section 7.9 clearly states this.

PCSPECIALIST - Terms & Conditions

General Terms & Conditions of business.
www.pcspecialist.co.uk www.pcspecialist.co.uk

That's why it's usually a good idea to read the Terms of Service before making any purchase.
 
You must log in or register to reply here.
Top