Noisy PC

SpyderTracks

We love you Ukraine

ZOTAC RTX 3060 Ti Twin Edge LHR​

  • ZT-A30610E-10MLHR
So yes, the fan speed is completely normal out of the box

"While the Founders Edition and every other RTX 3060 Ti custom design we've tested today offers fan stop, Zotac has scrapped that functionality for no apparent reason. The fan isn't particularly quiet in that mode as Zotac uses 30%, which is way too high and results in noise levels the Founders Edition achieves with a full gaming load. This will be a dealbreaker for many.

Gaming noise levels are way too high, too. With 42 dBA, they rival what AMD tried to sell us as "quiet" a while ago, but AMD has learned since and the 6800 Series is really quiet. "

Source: https://www.techpowerup.com/review/zotac-geforce-rtx-3060-ti-twin-edge/31.html

So yes, MSI Afterburner would be a good way to set a custom fan curve.
 

Logicdon

Active member
So yes, the fan speed is completely normal out of the box

"While the Founders Edition and every other RTX 3060 Ti custom design we've tested today offers fan stop, Zotac has scrapped that functionality for no apparent reason. The fan isn't particularly quiet in that mode as Zotac uses 30%, which is way too high and results in noise levels the Founders Edition achieves with a full gaming load. This will be a dealbreaker for many.

Gaming noise levels are way too high, too. With 42 dBA, they rival what AMD tried to sell us as "quiet" a while ago, but AMD has learned since and the 6800 Series is really quiet. "

Source: https://www.techpowerup.com/review/zotac-geforce-rtx-3060-ti-twin-edge/31.html

So yes, MSI Afterburner would be a good way to set a custom fan curve.
OK, so a base rpm of around 1200rpm is completely normal for this card out of the box. Well it's good to know there is no hardware issue (I know you said that earlier, just some of the other comments seemed to challenge that).

So I take it my drivers do not need to reinstalled. Again, good to know.
In theory I could then leave it to it's factory settings and there would be no problems? (apart from being a bit noisy).

Guess I need to learn how MSI afterburner fan curves work.
 

Scott

Behold The Ford Mondeo
Moderator
OK, so a base rpm of around 1200rpm is completely normal for this card out of the box. Well it's good to know there is no hardware issue (I know you said that earlier, just some of the other comments seemed to challenge that).

So I take it my drivers do not need to reinstalled. Again, good to know.
In theory I could then leave it to it's factory settings and there would be no problems? (apart from being a bit noisy).

Guess I need to learn how MSI afterburner fan curves work.

You absolutely can leave it as it is and it'll be fine. I would say, purely for education and understanding, it's completely worthwhile having a go with Afterburner. It's one of these things that I think most should spend some time doing :)
 

Logicdon

Active member
Hi, thanks, it is reassuring to know it isn't defective.

I did try Afterburner, but the GPU will not go below 1200rpm.

May call PCS to ask if they could change it for a different brand. Probably not, but I can only ask.

Cheers.
 

B4zookaw

VALUED CONTRIBUTOR
Hi, thanks, it is reassuring to know it isn't defective.

I did try Afterburner, but the GPU will not go below 1200rpm.

May call PCS to ask if they could change it for a different brand. Probably not, but I can only ask.

Cheers.
I assumed all 30 series cards had zero rpm capability. I guess not. I'd be a bit miffed to find I got one of the few cards that didn't. Increased acoustics and power draw for no reason.
 

Logicdon

Active member
Well I emailed them and got told basically, and massively paraphrasing - 'tough look, we only have the zotac, it's not our problem'.

OK, they said it way more politely than that, but that was the gist.
The PC is great, everything snappy and quick, but the constant hum when watching YouTube or whatever is a bit annoying.

I've learnt a lesson here, if I ever buy from PCS again, I will definitely buy my own GPU.

I can still return it due to distance selling regulations, so that is an option. As they only stock Zotac at the minute I have asked if they will refund the GPU on return of said GPU. They haven't replied yet. But I know the answer. And you know, my email was not as polite as theirs, I did stop short of profanities, it was difficult.

Anyway, a great PC for me with a bad hum. On the other hand, my daughter is loving using my old PC, the GTX 1060 is doing her proud.
 

SpyderTracks

We love you Ukraine
Well I emailed them and got told basically, and massively paraphrasing - 'tough look, we only have the zotac, it's not our problem'.

OK, they said it way more politely than that, but that was the gist.
The PC is great, everything snappy and quick, but the constant hum when watching YouTube or whatever is a bit annoying.

I've learnt a lesson here, if I ever buy from PCS again, I will definitely buy my own GPU.

I can still return it due to distance selling regulations, so that is an option. As they only stock Zotac at the minute I have asked if they will refund the GPU on return of said GPU. They haven't replied yet. But I know the answer. And you know, my email was not as polite as theirs, I did stop short of profanities, it was difficult.

Anyway, a great PC for me with a bad hum. On the other hand, my daughter is loving using my old PC, the GTX 1060 is doing her proud.
That is what you agree to when you order, it's outlined in the terms and conditions:

7.3 If you order a dedicated graphics card and the AIB (add-in-board) manufacturer name is not specified in the product description or on the final invoice, then you will receive a graphics card that meets the specification of the model/version stated. If the graphics card is exchanged under the warranty, then we will supply a graphics card that meets or exceeds the specification of the model/version stated. This model may be from a different AIB manufacturer and as a result the actual performance may be slightly higher or lower than the original model.

Source: https://www.pcspecialist.co.uk/terms/

Supplying your own is a good option, and definitely what I would choose to do.
 
Last edited:

Logicdon

Active member
So I've had this PC for 1 week.

I got the RTX 3060ti with no fan stop, I made a thread about this. I'm hoping to get it upgraded.

But now it seems it isn't even working!

It crashes on a few games I play: NMS - it plays but crashes a lot, RDR2 will freeze as soon as game loads. Shadow of Tomb Raider will not play. Only game that will is Age Of Empires 4.

I did nvidia clean install, no joy.

I looked up a tutorial on DDU, did that, reinstalled drivers, no joy.

'User benchmark' reported '137% is an outstanding 3D score, it's the bee's knees. This GPU can handle almost all 3D games at very high resolutions and ultra detail levels.'?

mxdiag reports no problems. Not sure what to do.

specs:


Case
LIAN LI LANCOOL 215 GAMING CASE
Processor (CPU)
Intel® Core™ i5 Six Core Processor i5-12400 (2.5GHz) 18MB Cache
Motherboard
ASUS® TUF GAMING B660-PLUS WIFI D4: ATX, LGA1700, USB 3.2, SATA 6GBs - ARGB Ready
Memory (RAM)
16GB Corsair VENGEANCE DDR4 3200MHz (2 x 8GB)
Graphics Card
8GB NVIDIA GEFORCE RTX 3060 Ti - HDMI, DP, LHR
1st Storage Drive
2TB SEAGATE BARRACUDA SATA-III 3.5" HDD, 6GB/s, 7200RPM, 256MB CACHE
1st M.2 SSD Drive
512GB INTEL® 670p M.2 NVMe PCIe SSD (up to 3000MB/sR, 1600MB/sW)
Power Supply
CORSAIR 850W RMx SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET
Power Cable
1 x 1.5 Metre UK Power Cable (Kettle Lead)
Processor Cooling
PCS FrostFlow 150 Series High Performance CPU Cooler
Thermal Paste
STANDARD THERMAL PASTE FOR SUFFICIENT COOLING
Sound Card
ONBOARD 6 CHANNEL (5.1) HIGH DEF AUDIO (AS STANDARD)
Network Card
10/100/1000 GIGABIT LAN PORT
USB/Thunderbolt Options
MIN. 2 x USB 3.0 & 2 x USB 2.0 PORTS @ BACK PANEL + MIN. 2 FRONT PORTS
Operating System
Windows 11 Home 64 Bit - inc. Single Licence [KUK-00003
 

B4zookaw

VALUED CONTRIBUTOR
Any BSOD when it crashes? If so, what does it report? Are there any Error messages logged in Event Viewer?
 

Logicdon

Active member
No BSOD. No messages.

Not sure what to look at in event viewer.

Ran furmark, only for a bout 5 mins as that program scares me, it only got to 65 degree and did not crash.
 

Logicdon

Active member
think i found it.

I see a lot of mention of nvlddmkm not responding
 

Attachments

  • event.png
    event.png
    201.2 KB · Views: 87

Logicdon

Active member
Read an article about renaming nvlddmkm.sys and then creating a new one. I do not have this file, is this the issue?
 

leea123

Enthusiast
if you only had it a week and you are not happy, I would call pcs I would let them take a look with remote access, and then maybe back for RMA to get it sorted. My pc was back with them three times and now very happy with it, after advice and help from here as well.
They really do give good service with getting things sorted when sent back.
I would just call them to say you are not happy with it, they will take it back and correct the issue. Mine started with a game crashing and it needed a new CPU , and motherboard in the end. You can just get faulty things from new.
There is a chance it may not be a component but if not happy just call and get support and start the process of getting it sorted.
 

B4zookaw

VALUED CONTRIBUTOR
Read an article about renaming nvlddmkm.sys and then creating a new one. I do not have this file, is this the issue?
A bit of googling leads to a range of possible causes/fixes, including a potential faulty card. I think it would be good to contact PCS now and raise it with them, while you're still within the 14 day cooling off period.
 

DarkPaladin

Enthusiast
I had a similar experience with a custom-built PC lately. The GPU ran fine for a week, then games would crash, artifact, or BSOD with the same error you mentioned. It turned out that the GPU was faulty and after sending it back to them, they replaced it and it's been working perfectly every since.

As you're still under warranty, I'd strongly recommend contacting PCSpecialist. They'll usually go through possible fixes over the phone (if calling), otherwise you could set up an RMA for them to give it a proper look with testing. From my experience, RMA's with PCSpecialist have always been a very positive and fast experience.
 

Logicdon

Active member
OK, so I called them, they got me to test the RAM, but they were ok. They then said the GPU was broke!

I'm sending the card back as faulty, they will refund me, then I can buy another GPU from them, which means I can upgrade from the Zotac (with no fan stop!), which was something I was considering anyway. So hopefully everything will be sorted soon. Only downfall is I have to pay postage to return (it would be free if I had sent the whole system). I'm glad I got the i5-12400 instead of i5-12400F, because I can carry on with iGPU for a few days.
 

Logicdon

Active member
Ok, so I first thought it was the gpu with no fan stop that was making my PC loud at idle. That cost me another £100 to change it to a 3070 with fan stop. But still loud when idling.

I then thought it must be the 2 big 200mm fans, but I unplugged them and the noise remained.

So it must be the cpu cooler fans. I opted (and was advised) for the PCS frostflow 150. I have tried to lower the speed but the lowest is 600 and it's still loud. I don't think it is defective, I just think it's a bit crap, my thermals are fine, but It's like having a hair dryer next to you when watching youtube! Should I buy a better cooler, or is it supposed to be loud?

Here is the specs:

Case
LIAN LI LANCOOL 215 GAMING CASE
Processor (CPU)
Intel® Core™ i5 Six Core Processor i5-12400 (2.5GHz) 18MB Cache
Motherboard
ASUS® TUF GAMING B660-PLUS WIFI D4: ATX, LGA1700, USB 3.2, SATA 6GBs - ARGB Ready
Memory (RAM)
16GB Corsair VENGEANCE DDR4 3200MHz (2 x 8GB)
Graphics Card
8GB NVIDIA GEFORCE RTX 3070
1st Storage Drive
2TB SEAGATE BARRACUDA SATA-III 3.5" HDD, 6GB/s, 7200RPM, 256MB CACHE
1st M.2 SSD Drive
512GB INTEL® 670p M.2 NVMe PCIe SSD (up to 3000MB/sR, 1600MB/sW)
Power Supply
CORSAIR 850W RMx SERIES™ MODULAR 80 PLUS® GOLD, ULTRA QUIET
Power Cable
1 x 1.5 Metre UK Power Cable (Kettle Lead)
Processor Cooling
PCS FrostFlow 150 Series High Performance CPU Cooler
Thermal Paste
STANDARD THERMAL PASTE FOR SUFFICIENT COOLING
Sound Card
ONBOARD 6 CHANNEL (5.1) HIGH DEF AUDIO (AS STANDARD)
Network Card
10/100/1000 GIGABIT LAN PORT
USB/Thunderbolt Options
MIN. 2 x USB 3.0 & 2 x USB 2.0 PORTS @ BACK PANEL + MIN. 2 FRONT PORTS
Operating System
Windows 11 Home 64 Bit - inc. Single Licence [KUK-00003]

I'm comfortable working inside a PC apart from messing around with cpu and cooler, I mean, I will install ram, graphics cards and hard drives and stuff, but I'm a bit nervous when it comes to cpu and thermal paste and how tight to fit the fan and what not.
PCS want 70 quid if want them to change it (that's just delivery).
Thinking I might buy my own and get a local shop to do the labour.

Any advice would be welcome. Should I just get used to it? What is a good, quiet cooler?
 
Top