New Cooling compatible with PC?

[Rendou]

Thank you! Got it out, now I'm unsure where to put the radiator, do I replace the fans at the front of my case? Or perhaps have the radiator above the top of the case and fans tied below? It doesn't fit above the motherboard well but I heard thats the best place for it

 

[Rendou]

I'm thinking front mount would be best, will try find a way to keep my original rgb fans, is it worth adding the new fans to the other side of the radiator or just keep them in a box somewhere?

 

[Rendou]

So the SATA power sable has nowhere to go I don't see any spare port from the psu. Does anyone know a solution to this? 😓

 

[Scott]

Mount it in a push pull configuration on top of the front fans. That's the simplest solution.

With the SATA plug, it should be a female one in order to plug in from the PSU? If you have an RMx PSU you will have additional cables in the welcome box to use.

 

[Rendou]

Mount it in a push pull configuration on top of the front fans. That's the simplest solution.

With the SATA plug, it should be a female one in order to plug in from the PSU? If you have an RMx PSU you will have additional cables in the welcome box to use.

Thanks found the spare cord and plugged it in, cooler itself seems to work fine, but the pc won't display after I turn it on, and for some reason I can't use the button to turn it off again even if pressed for a while

 

[Rendou]

Reseated everything and it now beeps three times and turns itself off and on again

 

[Scott]

Sounds like you've hit something loose during the install.

My immediate guess would be the RAM as that's in the vicinity you have been working in and would cause such problems.

 

[RichLan564]

Reseated everything and it now beeps three times and turns itself off and on again

Have you connected the pump tach. cable to the motherboard CPU fan header ?