MOBO LED’s when system is switched off.

[PaulScott670]

Hi all,

When my PC is switched off some of the LED’s are still active on the motherboard.

My question - Is it safe to do the following so the LED’s are no longer still on when system is powered off.

Advanced > APM Configuration > ErP Ready > Enable (S4+S5) in my BIOS.

Thanks.

 

[SpyderTracks]

Hi all,

When my PC is switched off some of the LED’s are still active on the motherboard.

My question - Is it safe to do the following so the LED’s are no longer still on when system is powered off.

Advanced > APM Configuration > ErP Ready > Enable (S4+S5) in my BIOS.

Thanks.

Is this a PCSpecialist system? Can you post your full specs from the order page?

that’s a suspend state, you can just turn off the rgb when the device is in sleep.

 

[PaulScott670]

Spec:

Case
CORSAIR iCUE 5000T RGB MID TOWER GAMING CASE
Promotional Item
Whilst stocks last, get a Corsair Peripheral Bundle with every iCUE system! [UK Layout]
Processor (CPU)
Intel® Core™ i9 24-Core Processor i9-13900K (Up to 5.8GHz) 36MB Cache
Motherboard
ASUS® ROG MAXIMUS Z790 HERO (LGA1700, DDR5, PCIe 5.0, Wi-Fi 6E)
Memory (RAM)
32GB Corsair DOMINATOR PLATINUM RGB DDR5 6000MHz (2 x 16GB)
Graphics Card
24GB ASUS TUF GEFORCE RTX 4090 OC EDITION - HDMI, DP
1st M.2 SSD Drive
4TB CORSAIR MP600 PRO NVMe PCIe M.2 SSD (up to 7000 MB/R, 6850 MB/W)
1st M.2 SSD Drive
2TB CORSAIR FORCE MP600 NVMe PCIe M.2 SSD (up to 4950 MB/R, 4000 MB/W)
Power Supply
CORSAIR 1000W RMx SERIES™ - MODULAR 80 PLUS GOLD, ULTRA QUIET
Power Cable
1 x 1.5 Metre UK Power Cable (Kettle Lead, 1.0mm Core)
Processor Cooling
CORSAIR iCUE H150i ELITE LCD XT RGB CPU Cooler
Thermal Paste
STANDARD THERMAL PASTE FOR SUFFICIENT COOLING
Extra Case Fans
3 x Corsair LL120 RGB LED Fan + Controller Kit
Sound Card
ONBOARD 6 CHANNEL (5.1) HIGH DEF AUDIO (AS STANDARD)
Network Card
10/100/1000 GIGABIT LAN PORT
USB/Thunderbolt Options
MIN. 2 x USB 3.0 & 2 x USB 2.0 PORTS @ BACK PANEL + MIN. 2 FRONT PORTS
Operating System
Windows 11 Home 64 Bit - inc. Single Licence


How would I go about just disabling the LED’s? I tried the stealth mode via the Bios but it still shows some lights on the mobo?

 

[SpyderTracks]

 

[PaulScott670]

Me again!

I’ve followed those instructions and that’s all worked for the RGB but there are still lights that are always on. I believe it’s the start button on the mobo

 

[SpyderTracks]

Oh, if you want every led off, then yes, you’d need to alter the suspend state, you may face issues in reboot though

 

[PaulScott670]

Yeah I done a lot of reading regarding the reboot issues. I’ll just need to deal with that piercing white light while trying to sleep 😂.

Thanks again for your help.