Martinr36
MOST VALUED CONTRIBUTOR
Do you have commander core or commander pro in your set up
In case SensorPanel for Aida64
- Thread starter mossmotorsport
- Start date
Martinr36
MOST VALUED CONTRIBUTOR
Seems like it's a known problem with the Cappellix, and apparently a hard nut to crack
AIDA64 not detecting any sensors for Corsair H150i Elite Capellix iCUE Controller Core
I have the latest BETA version for AIDA64 and the only sensor I am seeing from the AIO is the pump fan from the motherboard since it has a connector from the pump to the motherboard CPU fan header and it shows up as the CPU fan in AIDA64. The rest of the six fans connected to the iCUE controller ...
forums.aida64.com
TonyCarter
VALUED CONTRIBUTOR
Commander Pro and H100i Platinum.
Martinr36
MOST VALUED CONTRIBUTOR
yeah, seems to be a problem with commander core and Capellix
Well, mine has arrived and I’ve got it in there. Literally just paired it up as a second screen, the sensor panel fun can start tomorrow. Don’t think it looks too bad and my cables are hidden. Just need to chop off the little tabs at each corner to make it look a bit tidier, I reckon.
TonyCarter
VALUED CONTRIBUTOR
Be warned, you'll find it's a time sink 
Although I thought a man of your means would have bought the fully-encapsulated 1200x800 one instead
Although I thought a man of your means would have bought the fully-encapsulated 1200x800 one instead
Martinr36
MOST VALUED CONTRIBUTOR
So where's it all connected in the case, I've got mine external
I’m treating this one very much as a trial run! The screen was only £30 so if it works out I may upgrade in future 👍Be warned, you'll find it's a time sink
Although I thought a man of your means would have bought the fully-encapsulated 1200x800 one instead
The HDMI and USB are connected on the outside of the case, I’ve fed the cables through a gap below the GPU, down the side and along the bottom of the case. The smoky glass panel very much helps keep the cables looking hidden.
RichLan564
Bright Spark
Which screen did you end up going with ?
Some no-name Chinese one from a third party Amazon seller. Seems to be doing the job though!
I’ve had a little time to faff about with the first downloadable screen I found on the forums, I think it’s the same one that @TonyCarter has. Still a work in progress but it’s a start…
TonyCarter
VALUED CONTRIBUTOR
You won't see any FPS figure until you've got a game running, and you'll probably need something like Riva Tuner Statistics Server installed to feed that to Aida64.
www.guru3d.com
Guru3D RTSS Rivatuner Statistics Server Download 7.3.6 Final
Here you can download RTSS Rivatuner Statistics Server. This is the official homepage for Rivatuner. Initially designed as a small helper application for RivaTuner graphics card utility, RivaTuner Statistics Server became de-facto framerate monitoring, On-Screen Display and high-performance...
www.guru3d.com
Martinr36
MOST VALUED CONTRIBUTOR
Yeah that's the one I'm working with and adapting
RichLan564
Bright Spark
This is my next project for sure, however I am home alone this weekend with Amazon and a credit card, a Keychron K8 keyboard and Logitech G703 mouse are already inbound so I may have to delay the screen a few weeks 😜
Martinr36
MOST VALUED CONTRIBUTOR
Home alone with Amazon and a credit card.......😂🤐👍
TonyCarter
VALUED CONTRIBUTOR
This last 12 months I've used the money I've saved from working from home to by a 320D Touring, a Tempur mattress, a gaming PC, a QLED TV, a OLED TV, a low-mileage S54 engine, a supercharger (for 475bhp)...and lots of other little stuff that I'm not going to tot up.
TonyCarter
VALUED CONTRIBUTOR
Definitely found that iCUE/Corsair does not like playing with Aida64...
If I have Aida64 off after a restart then in most cases I can adjust my fan curves in iCue.
If I have Aida64 on after a restart then I cannot access any fan curves or change RGB settings via iCue (I can see the AIO, but applying a new colour scheme does nothing).
So, my workaround is to set everything as I want it in iCUE whilst Aida64 is not running, and then enable Aida64 from the next boot so that I can see the Corsair sensors in the Aida64 sensorpanel...but now I realise iCUE doews not see the temps so doesn't ramp up the fans!!!
If I have Aida64 off after a restart then in most cases I can adjust my fan curves in iCue.
If I have Aida64 on after a restart then I cannot access any fan curves or change RGB settings via iCue (I can see the AIO, but applying a new colour scheme does nothing).
So, my workaround is to set everything as I want it in iCUE whilst Aida64 is not running, and then enable Aida64 from the next boot so that I can see the Corsair sensors in the Aida64 sensorpanel...but now I realise iCUE doews not see the temps so doesn't ramp up the fans!!!
Martinr36
MOST VALUED CONTRIBUTOR
Have you been on the aida furum to see if you can see anything thereDefinitely found that iCUE/Corsair does not like playing with Aida64...
If I have Aida64 off after a restart then in most cases I can adjust my fan curves in iCue.
If I have Aida64 on after a restart then I cannot access any fan curves or change RGB settings via iCue (I can see the AIO, but applying a new colour scheme does nothing).
So, my workaround is to set everything as I want it in iCUE whilst Aida64 is not running, and then enable Aida64 from the next boot so that I can see the Corsair sensors in the Aida64 sensorpanel...but now I realise iCUE doews not see the temps so doesn't ramp up the fans!!!
TonyCarter
VALUED CONTRIBUTOR
Not yet - other than a cursory glance to pick up a sensor panel template!
Martinr36
MOST VALUED CONTRIBUTOR
Its worth a look, I picked up that post about the capellix very quickly