Fractal define 7 mid tower case fans 0rpm

Combat

New member
In armoury crate it shows all chassis fans at 0rpm and in bios it shows them as N/A I was wondering if they are working/if I can control the speed? they are the stock fans that come with the case. CPU fan is all good.
 

TonyCarter

VALUED CONTRIBUTOR
If you remove the front cover, can you actually if see the fans are spinning?

Doesn’t the fan hub connect to the CPU_FAN header on that case?

If so, you’d only see one fan speed to adjust as they all run at the same speed. If the reported speed is between 600-2400rppm then it’s probably the case fan…if it’s a lot more than that then it will be the motherboard chipset fan.
 

Combat

New member
Ok I can't remove the front cover the filter it won't come out and I don't want to force it, but it says 2284 rpm on armoury crate so I guess the case fans are working, thanks!
 

TonyCarter

VALUED CONTRIBUTOR
Well, the front cover should open, and the filter pop out...but I don't know how tight either of those should be as I don't have one.

But just opening the front panel/door should let you see the fans.

Define_7_Sheetmetal_Black_Vented_Top_Floating_Layers-1-scaled.jpg
 

Combat

New member
They are tight, I didn't want to force it too much but it seemed like it wasn't going to come out, but I just tried it again and it came out after I forced it a little and the fans are spinning lol, thanks :)
 
Top