Waht is wrong with this?

[Delludus]

Case: STYLISH PIANO BLACK ENIGMA CASE + 2 FRONT USB
Processor (CPU): Intel® Core™i3-2120 Dual Core (3.30GHz, 3MB Cache) + HD Graphics
Motherboard: ASUS® P8Z68-V LX: USB 3.0, SATA 6GBs, ATI®CrossFireX
Memory (RAM): 4GB SAMSUNG DUAL-DDR3 1333MHz (2 X 2GB)
Graphics Card: 1GB NVIDIA GEFORCE GTX 560 - DVI,HDMI,VGA - 3D Vision Ready
2nd Graphics Card NONE
3rd Graphics Card NONE
1st Hard Disk: 250GB SATA-II 3-Gb/s HARD DRIVE WITH 8MB CACHE (7,200rpm)
2nd Hard Disk: NONE
RAID NONE:
SSD CACHE DRIVE: NONE
1st DVD/BLU-RAY Drive:NONE
2nd DVD/BLU-RAY Drive:NONE
Memory Card Reader: NONE
Power Supply: 450W Quiet 80 PLUS Dual Rail PSU + 120mm Case Fan (£29)
Processor Cooling: INTEL SOCKET LGA1155 STANDARD CPU COOLER
Fan Controller: NONE
Sound Card: ONBOARD 6 CHANNEL (5.1) HIGH DEF AUDIO (AS STANDARD)
Network Facilities: 10/100/1000 GIGABIT LAN PORT - AS STANDARD ON ALL PCs
USB Options: 6 x USB 2.0 PORTS @ BACK PANEL (MIN 2 FRONT PORTS) AS STANDARD
Modem: NONE, I WILL BE USING BROADBAND
Floppy Disk Drive: NONE
Firewire & Video Editing:NONE
TV Card: NONE


Okay. I ran futuremark 11 on this rig. just to test it, and it says its very slow compared to similar rigs.
I updated all the drivers to the newest ones, and still saying the same thing.
Points are P3718 3DMarks in futuremark. Not like i want to play with it, but, it is bothering me. Is something malfunctioning?

Your Score is Low Compared to Similar Systems.
There may be a problem

http://3dmark.com/3dm11/2707893

 

[mantadog]

If your not experiancing any issues then i see no need to worry. I have had a quick look and i don't see anything that stands out as a low score, it seems to be saying your GPU is slow, but it's not really from what i can see.

I wouldn't get yourself worked up over it.

 

[Karnor00]

Looking in a bit more detail at your scores compared to the target scores for your hardware you are actually scoring 3718 compared to a target score of 3700. Graphics are 61 below target (this is triggering the 'low score' message) and physics are actually 384 above target.

So overall it looks fine to me - makes me wonder if 3dmark are just trying to sell you some stuff by making out that your system is below spec.

 

[Delludus]

Thank you for the info.
Iam relived.

I also got a 4gb usb pendrive from pcs today, and when i plug it in, it says not encrypted.
Since iam not a total retard, i tried to format it, but it says insert a disk into the drive i: (which is the usb itself).
And also if i want to do into the hard drive management, it freezes out. Doesnt show any drives until i remove the pendrive. Any clue on that?
I tried hp tool to format it as well. No use. Tried to use cmd prompt in admin mode to format it. It freezes out. So in my computer i can see the pendrive, but cannot access it, and cannot format it, or do anything. It freezes out if i try to do anything, but when i remove it, everything goes back to normal on the pc. :/
Its brand new. Got it today.

 

[mantadog]

Do you have another computer to try it on? Have you tried other memory sticks or just this one you got from PCS? Could be a driver issue, are you using the built in card reader (if you have one) or just a standard usb port?

 

[Delludus]

Iam using standard usb port. And i tried other ones, no problem at all. I also tried all 6 usb plugs. :/

 

[mantadog]

Might be the USB stick itself then, I would drop PCS an email I'm sure they will send you a replacement.

 

[Delludus]

Okay. It seems like i almost solved the pendrive problem.
I write down what i did, just in case someone is getting the same problem.
i went into command prompt in admin mode, and typed in diskpart command and checked out the disks, typing list disk command.
It shown me the pendrive as a 4000mb disk.
it was disk 2 for me, so i typed select disk 2 command, and then i got into the pendrive.
i typed list partition, and it didnt show any, so probably that was the problem. i typed clean command just to make sure, i erase all the settings in the pendrive, and then i typed create partition primary command, to make a new partition.
then i typed list partition again, and saw 1 partition unformatted.
so i typed format fs=ntfs command, and waited until it finished.
and it failed...
i will try something else.