Search results

Good point, the fans I have on this case TD500 mesh only light up very briefly during start up. I've never figured how to get them on full time.... Any ideas? I have tried to find software btw

It's all very confusing!! I've gone ahead and ordered the commander pro, rgb hub, 1 x 120mm Corsair LL, 1 x 140mm Corsair LL for now (maybe I add an additional 140mm down the road)! Thanks all!!

Hey thanks for the note. I have neither atm, but I will go with the rgb hub and commander pro for ease on this I think :)

Great thank you. I will go with commander pro, rgb hub and 2-3 corsair LL fans. Seems like this is a really neat way to do it and I won't have to do much work in the 'front' of the machine with all of the wires etc being dealt with behind the back panel :)

Great thank you, you've been a massive help and it's all starting to make sense. Just one more thing, I note that I can purchase a 3 pack of LL which come with a lightning node Pro, Am I correct in thinking that this will not give me control of fan speed (as commander pro would)? There commander...

I think I understand, so I would connect the commander pro via USB to the mobo and sata to PSU. Connect the fan hub to the commander pro and connect all of the rgb wires from the fans to the fan hub. Finally connecting the fan control wires to the commander pro. So basically, does this mean...

Thanks for the response, I'm not dead set on those fans so may well switch to those you've suggested. Nooby question but how would this work? I'm trying to keep it as simple as possible as I've never worked on a pc before. Seems as if I only installed one fan it would be really simple (occupy...

Basically, what I'm asking is whether I can plug the two ARGB fans listed above into a hub like this: Thermaltake FP -10 Commander Port Hub for PWM Fans, 10 Ports, SATA Power Input, 2 Years Warranty - Black https://www.amazon.co.uk/dp/B015KG6HP0/ref=cm_sw_r_apan_glt_fabc_F04TVGG3H2W09ZTXJFXW...

It is but I can't capture the amendments I made, here is it slightly edited: Case COOLERMASTER TD500 Mesh Processor (CPU) AMD Ryzen 5900x 12 core (3.7-4.8ghz) Motherboard ROG STRIX x570-f gaming Memory (RAM) 32GB Corsair VENGEANCE DDR4 3600MHz (2 x 16GB) Graphics Card 10GB NVIDIA GEFORCE RTX...

Good shout, here is the build: COOLERMASTER TD500 Mesh AMD 5900X Nvidia 3080 10gb (zotac) 32gb 3600mhz vengeance (2 x 16gb) ROG Strix x570-f gaming 1tb ssd 1tb m.2 nvme Corsair 1000w rmx modular gold Corsair plat h115i hydro series Corsair 1000w Rmx Series modular 80 plus gold 3 intake fans...

Hey guys, Hoping someone can help me out with this. I'm planning to install 2 ARGB case fans this week. One to the rear (120mm) and one at the top rear (140mm). Here is an example of the corsair fans I will be using...

Talking to myself.... And then I see this video where the guy mounts a 360mm rad and fans at the top of this case, maybe I'll go with this

Thanks, it's not so much the temps now, I had cod cold War running max settings earlier (Ray tracing etc to see how the system copes) 1440p at around 120fps at between 73 and 75 degrees. It's more than I know my aio is going to suffer because this 280mm system seems to be a really poor fit for...

Not a bad shout - but still stuck with the issue of the pump being the highest part of the loop 😔 think I'll look at purchasing a new full tower ASAP and try to rebuild it..

Yeah it had crossed my mind but probably not a good idea! Do you think there is anyway I could get assistance from PCS on this (e.g. Have the case changed)? Everywhere I look people seem to be of the opinion that my aio won't last very long/perform very well with this configuration

Hey guys, I've taken a look this morning. And I'm quite sure I cant move the radiator up (see below pic - missing a mount point where I've placed the top arrow). Ill be installing a rear exhaust tomorrow once the fan arrives. But I suppose my best option at this point would be to change to a...

Haha thanks man. I will have a crack at this tomorrow/Sunday - will let you all know! :)

Great thats what I'll go with then. That would've been my next question if the tubes wouldn't reach (could I mount it higher) thank you!

Thanks @SpyderTracks and @Ash_. So I'm kinda stuck with having it front mounted? I would need to 'flip' the radiator if the tubes would reach? If that is the case could I just add 2 x 140mm to the top and 1 120mm to the rear? And leave the two fans where they are right now?

Maybe I'm misunderstanding, but I thought the pump was best to be at the lowest point of the loop?